Display User Defined Macros 1 and 2

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

You can display the values of any two user-defined macros (Macro Label 1, Macro Label 2).

note: The names Macro Label 1 and Macro Label 2 are changeable labels. just highlight the name, key in new name, and press ENTER.

To set which two macro variables will display under Macro Label 1 and Macro Label 2 on the Operation Timers & Setup display window:

  1. Press CURRENT COMMANDS.
  2. Press PAGE UP or PAGE DOWN to reach the Operation Timers & Setup page.
  3. Use arrow keys to pick the Macro Label 1 or Macro Label 2 entry field (to the right of the label).
  4. Key in the variable number (without #) and press ENTER.

The field to the right of the entered variable number displays the current value.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback