Disengaging 4th and 5th Axes

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

If the machine is not built-in configured, you can disengage the 4th and 5th axes from Rotary Axis:

caution: Do not connect or disconnect any cables with the control on.
  1. Using navigation keys select Rotary tab under Settings. Press DOWN cursor to the Current Rotary Selections table
  2. If you want to disable an axis, press ENTER to toggle the axis disable/enable check box. A disabled axis remains configured but does not move.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.