Clamping Force Adjustment Procedure

Classic Control - Lathe Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

To adjust the clamping force on the drawtube:

Draw tube Clamping Force Adjustment: [1] Locking knob, [2] Adjustment knob.

  1. Go to Setting 92 on the Settings page and choose either I.D. clamping or O.D. clamping. Do not do this with a program running.
  2. Turn the locking knob [1] counterclockwise to loosen.
  3. Turn the adjustment knob [2] until the gauge reads the desired pressure. Turn clockwise to increase pressure. Turn counterclockwise to decrease the pressure.
  4. Turn the locking knob [1] clockwise to tighten.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback