Changing Setting 30

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Setting 30 (and Setting 78 for the 5th axis) specifies a parameter set for a given rotary unit. These Settings allow you to select your rotary unit from a list, which then automatically sets the parameters necessary to allow your mill to interact with the rotary unit.

warning: Failure to match the correct brush or brushless rotary setting to the actual product being installed on the mill may cause motor damage. B in the settings denotes a brushless rotary product. Brushless indexers have two cables from the table and two connectors at the mill control for each rotary axis.

New Rotary File Selection Menu

  1. Highlight Setting 30 and press the left or right cursor arrow.
  3. Select NEW and then press ENTER.

    The list of available rotary parameter sets appears.

  4. Press the up or down cursor arrow to select the correct rotary unit. You can also start typing the name of the rotary unit to reduce the list before making a selection. The rotary model highlighted in the control must match the model engraved on the rotary unit’s identification plate.
  5. Press ENTER to confirm your choice.

    The parameter set is then loaded into the machine. The name of the current parameter set appears for Setting 30.

  7. Do not attempt to use the rotary until you cycle machine power.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.