Active Tool

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Active Tool Display Example

This display gives information about the current tool in the spindle. This information includes:

  • The tool number
  • The type of tool (if specified in the tool offsets table)
  • Maximum tool load (the highest load, in percent, that has been put on the tool)
  • The remaining percentage of tool life or tool group
  • An example image of the tool type (if specified)
  • The next tool pocket number and the tool number currently in that pocket

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.