Actions with a Block Selection

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

After you make a text selection, you can copy and paste it, move it, or delete it.

note: These instructions assume you have already made a block selection as described in the Block Selection section.
note: These are actions available in MDI and the Program Editor. You cannot use UNDO to reverse these actions.
  1. To copy and paste the selection: Move the cursor to the location where you want to put a copy of the text. Press ENTER.

    The control puts a copy of the selection on the next line after the cursor location.

    note: The control does not copy the text to the clipboard when you use this function.
  2. To move the selection: Move the cursor to the location where you want to move the text. Press ALTER.

    The control removes the text from its current location and puts it in the line after the current line.

  3. Press DELETE to delete the selection.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback