901 - Obtain Address Automatically

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Retrieves a TCP/IP address and subnet mask from a DHCP server on a network (Requires a DHCP server). When DHCP is on, TCP/IP, SUBNET MASK and GATEWAY entries are no longer required and has *** entered.

note: The ADMIN section at the end provides the IP address from DHCP. The machine must be turned off and back on for changes to this setting to take effect.
note: To get IP settings from DHCP:
  1. At the control, press LIST PROGRAM.

  2. Press CANCEL.

  3. Press the right arrow for the Hard Drive directory and press ENTER.

  4. Type in ADMIN and press INSERT.

  5. Select ADMIN folder and press ENTER.

  6. Copy the ipconfig.txt file to disk or USB and read it on a Windows computer.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback