69 - DPRNT Leading Spaces

Classic Control - Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

This is an ON/OFF setting. When set to OFF, the control does not use leading spaces generated by a macro DPRNT format statement. Conversely, when set to ON, the control uses leading spaces. This example illustrates control behavior when this setting is OFF or ON.

% #1 = 3.0 ; G0 G90 X#1 ; DPRNT[X#1[44]] ; %

OUTPUT

OFF ON
X3.0000 X 3.0000

Notice the space between the X and the 3 when the setting is ON. Information can be easier to read when this setting is ON.

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback