#2001-#2800 Tool Offsets

Next Generation Control Mill Operator's Manual

The Online Interactive Operator's Manual is currently available in English only.

A PDF version of the Operator's Manual is available for download in multiple languages. Click the link below to view the Operator's Manual in your language. Click "Continue" to view the online version in English.

Get a translated PDF Download Continue

Each tool offset has a length (H) and diameter (D) along with associated wear values.

#2001-#2200 H geometry offsets (1-200) for length.
#2201-#2400 H geometry wear (1-200) for length.
#2401-#2600 D geometry offsets (1-200) for diameter.
#2601-#2800 D geometry wear (1-200) for diameter.

Each tool offset has a length (H) and diameter (D) along with associated wear values.

#2001-#2200 H geometry offsets (1-200) for length.
#2201-#2400 H geometry wear (1-200) for length.
#2401-#2600 D geometry offsets (1-200) for diameter.
#2601-#2800 D geometry wear (1-200) for diameter.

Use these following macro variables to read or set the following geometry, shift, or wear offset values:

#2001-#2050 X-Axis geometry/shift offset
#2051-#2100 Y-Axis geometry/shift offset
#2101-#2150 Z-Axis geometry/shift offset
#2201-#2250 Tool nose radius geometry
#2301-#2350 Tool tip direction
#2701-#2750 X-Axis tool wear
#2751-#2800 Y-Axis tool wear
#2801-#2850 Z-Axis tool wear
#2901-#2950 Tool nose radius wear

Be aware: Many service and repair procedures should be done only by authorized personnel. The service technicians at your Haas Factory Outlet (HFO) have the training, experience, and are certified to do these tasks safely and correctly. You should not do machine repair or service procedures unless you are qualified and knowledgeable about the processes.

Danger: Some service procedures can be dangerous or life-threatening. DO NOT attempt a procedure that you do not completely understand. Contact your Haas Factory Outlet (HFO) and schedule a service technician visit if you have any doubts about doing a procedure.

Feedback